UPVC Replacement Door Handles
The handles on your doors are worn out over time and need to be replaced. When replacing them, it is essential that the new handles conform to the dimensions of the old handle.
The top screw position the lever, and the keyhole dimensions are the three measurements that you need to verify. Refer to the size guide for assistance in this.
Inline Lever/Lever
A lever handle is a modern-day door handle designed to suit new or replacement doors. This type door handle is available in a wide range of styles and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are constructed of durable materials and are perfect for doors with multi-point locks that require a heavy duty design. The handles are inline and run off the same spindle and screw fixings. They can be easily fitted to new or existing uPVC/Composite doors.
The design of the sprung lever allows the handle to be positioned and angled to provide a comfortable grip and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles. This helps ensure that the quality of finish and performance will last for a long time. The lever that springs is adjustable to fit a wide range of locks. This is particularly useful for doors with narrower openings where the cylinder is further back in the door. A shorter lever is an ideal choice for doors where the latch could be activated by the thumb turn inside.
Lever Pad
The lever pad upvc handle is distinct from the lever handles that are used on the majority of doors. The handle can operate from a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are generally used on UPVC double glazed doors. They come in a variety of styles and finishes.
The handles have been tested to the minimum of 200 000 cycles and are available in various finishes, including White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This provides the handle with the best performance and durability to serve the purpose it was designed for.
All of the UPVC lever pad designs come with a spindle and screws which allow them to be installed on a new or existing uPVC door. The backplate fixation centres of 211mm permit a larger handle, which is usually a benefit when replacing a damaged or old multi-point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of handles that slide out of the horizontal position when not in use.
It is crucial to match the PZ dimensions for both the multipoint lock as well as the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement can also be referred to as 'handle centres' or cylinder centres'. It is important for matching the correct handles.
After you have determined the correct size of PZ it is important to ensure that the push and lever pads are shaped to match the American with Disabilities Act compliant handles you require for your door. They typically have a square or round design with an internal lever and an external push pad.
The majority of the UPVC Lever Pads that we sell are sprung. This means that they return to a horizontal position after they are not in use instead of hanging and possibly being stuck in the frame. This keeps draughts out of the building. It is also the case that the majority of UPVC handle lever pad style handles are hand-operated, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks are typically found on uPVC doors, but can be utilized on other types of doors. They operate by using a key to unlock a cylinder case which will reveal pins that can be aligned with the pins in the lock body, allow them to rotate a revolving cam, thus opening the door. Euro cylinders can be equipped with up to six pins, with both internal and external doors generally needing different levels of security.
The choice of the correct cylinder is crucial; it depends on how your door and handle are utilized. External doors, for instance are required to be fitted with higher security cylinders, whereas doors inside can be secured using the standard cylinder. Some cylinders have extra features that can improve security, such as anti-drill or anti-bump properties.
To make sure that the euro cylinder is of the right size for your door, it should be measured accurately. The cylinder needs to be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, in the event that one is present. If you are unable measure it using the lock in a fixed position, you can take it out of it. A cylinder that is protruding beyond the handle and escutcheon could be susceptible to attacks like lock snapping, so it is important that it is not too long.
The design of many modern cylinders includes anti-drilling and bump resistance features. These features are designed to minimize the chance of a attack by forcing the cylinder to rotate in an opposite direction. This can help stop the attack and ensure your doors are secure.
Some cylinders are designed to resist snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock and then the front of the cylinder is snapped off. This is a much faster and easier way to gain access than using the use of a multipoint locking system. It also leaves less evidence of the burglary which can make it difficult to prove insurance claims.
Spring Cassette
This spring cassette is found in the base plate of the door handle. It provides a sprung solution to help return the multipoint lock handles to their original position after usage. There was a time when handles of this kind did not have a spring built into them, and without it they are more likely to slide or drop once the locking mechanism is disengaged. This component is the best solution to solve this issue. It also stops your door from becoming stuck in the open or closed position as they are difficult to close manually.
These spring cassettes were created to be used with a spring multipoint locks. They will not fit handles that are not sprung and you'll have to cut a hole into the backplate to allow them to fit. (Please check the image for a technical diagram). These cassettes are a solution for damaged or missing cassettes in the backplate of uPVC door handles. They are sold as one unit. They have a square-cut out that can accommodate an 8mm shaft.
www.repairmywindowsanddoors.co.uk are an excellent cost-effective way to fix the problem of handles on your doors sliding. They are simple to install and can extend the life of your uPVC door. For more information on our selection of uPVC accessories and spares, please feel free to get in touch with our team. We are on hand to assist you and provide expert advice.